- 1776 Sporting Goods https://1776sportinggoods.com/product-category/rings-and-mounts/ Thu, 05 Dec 2024 23:00:49 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://1776sportinggoods.com/wp-content/uploads/2021/09/cropped-1776_square_logo_003-32x32.jpg - 1776 Sporting Goods https://1776sportinggoods.com/product-category/rings-and-mounts/ 32 32 198460975 Steiner Rings & Mounts https://1776sportinggoods.com/product/steiner-rings-mounts/ Wed, 17 Jul 2024 22:43:52 +0000 https://1776sportinggoods.com/?post_type=product&p=7540 T-Series Rings Steiner Rings are the foundation of a precision shooting system, designed and engineered to guarantee precise optical alignment and shot-after-shot accuracy. The T-Series Rings offer the perfect riflescope mounting solution for precision tactical shooting. 5960: 30mm diameter, low height (.885″), 4.1oz. 5961: 30mm diameter, medium height (1.0″), 4.3oz. 5962: 30mm diameter, high height (1.25″), 5.1oz. […]

The post Steiner Rings & Mounts appeared first on 1776 Sporting Goods.

]]> T-Series Rings

Steiner Rings are the foundation of a precision shooting system, designed and engineered to guarantee precise optical alignment and shot-after-shot accuracy. The T-Series Rings offer the perfect riflescope mounting solution for precision tactical shooting.

  • 5960: 30mm diameter, low height (.885″), 4.1oz.
  • 5961: 30mm diameter, medium height (1.0″), 4.3oz.
  • 5962: 30mm diameter, high height (1.25″), 5.1oz.
  • 5963: 30mm diameter, extra high height (1.35″), 5.4oz.
  • 5964: 34mm diameter, low height (.885″), 3.8oz.
  • 5965: 34mm diameter, medium height (1.0″), 4.2oz.
  • 5966: 34mm diameter, high height (1.25″), 4.9oz.
  • 5967: 34mm diameter, extra high height (1.35″), 5.2oz.

Measurement is from the top of the mounting rail to the center of the optic. Height measurement is in inches.

 

Torque Specifications:

  • Ring Top: 20 in-lb.
  • Base Cross Bolt – 60in-lb.

Specifications

Item Number Series Size Height to Center Finish Top Ring Torque Base Cross Bolt Torque Weight
5960 T 30 mm Low Height Black 20 in-lb. 60 in-lb. 4.1 oz
5961 T 30 mm Medium Height Black 20 in-lb. 60 in-lb. 4.3 oz
5962 T 30 mm High Height Black 20 in-lb. 60 in-lb. 5.1 oz
5963 T 30 mm Extra High Height Black 20 in-lb. 60 in-lb. 5.4 oz
5964 T 34 mm Low Height Black 20 in-lb. 60 in-lb. 3.8 oz
5965 T 34 mm Medium Height Black 20 in-lb. 60 in-lb. 4.2 oz
5966 T 34 mm High Height Black 20 in-lb. 60 in-lb. 4.9 oz
5967 T 34 mm Extra High Height Black 20 in-lb. 60 in-lb. 5.2 oz

H-Series Rings

Steiner Rings are the foundation of a precision shooting system. designed and engineered to guarantee precise optical alignment and shot-after-shot accuracy.

The H-Series Rings have a sleek design and rugged, lightweight construction. Perfect for your favorite hunting rifle.

  • 5957: 30mm diameter, low height (.85″), 2.3oz.
  • 5958: 30 mm diameter, medium height (1.0″), 2.6oz.
  • 5959: 30mm diamter, extra tall (1.35″), 3.3oz.

Torque Specifications:

  • Ring Top: 20 in-lb
  • Crossbolt: 20 in-lb

Specifications

Item Number Series Size Height to Center Finish Top Ring Torque Base Cross Bolt Torque Weight
5957 H 30 mm Low Height Black 20 in-lb. 20 in-lb. 2.3 oz
5958 H 30 mm Medium Height Black 20 in-lb. 20 in-lb. 2.6 oz
5959 H 30 mm Extra Tall Black 20 in-lb. 20 in-lb. 3.3 oz

P-Series AR Mount

The Steiner P-Series Cantilever mount offers the perfect mounting solution for AR-15 and flattop platforms. Made from rugged aluminum alloy to be incredibly strong, yet lightweight.

P-Series AR Mount Features:

  • New lightweight design
  • Mounts to any picatinny style rail
  • Designed to offer perfect eye relief on modern AR-pattern rifles
  • Made in USA

 

Specifications

Item Number Series Size Height to Center Finish Top Ring Torque Base Cross Bolt Torque
5973 P 30 mm 36 mm Black 20 in-lb. 65 in-lb.
5974 P 34 mm 36 mm Black 20 in-lb. 65 in-lb.

The post Steiner Rings & Mounts appeared first on 1776 Sporting Goods.

]]> 7540 G69 Mount https://1776sportinggoods.com/product/g69-mount/ Thu, 07 Mar 2024 22:42:22 +0000 https://1776sportinggoods.com/?post_type=product&p=7109 FIXED NV GOGGLE MOUNT

The G69 mount provides all the same features as the G66 with greater weight savings and extended vertical travel adjustment.

The post G69 Mount appeared first on 1776 Sporting Goods.

]]> 28300G69-B G69 Light Weight/Non-Breakaway Base/No-Magnet/Three Hole Metal Shroud/Lanyard/Cup, Black 28300G69-T G69 Light Weight/Non-Breakaway Base/No-Magnet/Three Hole Metal Shroud/Lanyard/Cup, Tan
FEATURES AND BENEFITS

  • Lightweight Lo Pro/mount, shroud & lanyard solution
  • Mounts on to any helmet drilled with three-hole pattern
  • Reduction of material with increased strength to weight ratio
    ■ Increased vertical/horizontal travel for use with a wide
    array of protective masks, bridges and NVG’s
    ■ Permanent Lo Profile design to the helmet
    ■ 5 Year Standard Limited Warranty
DIMENSIONS 4.75” L x 2.58” W x 3.80” H
INTERNAL POWER SOURCE N/A
RUNTIME N/A
FORE/AFT TRAVEL 1.30”
HEIGHT ADJUSTMENT .90”

 

The post G69 Mount appeared first on 1776 Sporting Goods.

]]> 7109 G30 Mount https://1776sportinggoods.com/product/g30-mount/ Thu, 07 Mar 2024 21:32:22 +0000 https://1776sportinggoods.com/?post_type=product&p=7104 FIXED NV GOGGLE MOUNT

The Wilcox G30 Helmet Mount with Lanyard is a permanently fixed mount that securely locks the NVG onto any helmet drilled with a standard three-hole configuration. The G30 mount offers several adjustment points to create a precise fit and allows the operator to flip the NVG’s out of the way when not being used.

The post G30 Mount appeared first on 1776 Sporting Goods.

]]>
28300G30-B G30 Non-Breakaway Base/Magnet/Three Hole Metal Shroud/Lanyard/Cup, Black
28300G30-T G30 Non-Breakaway Base/Magnet/Three Hole Metal Shroud/Lanyard/Cup, Tan

FEATURES AND BENEFITS

  • Maintains a very low profile on the helmet
  • Dovetail shoe interface securely locks NVG’s into place
  • Lightweight/low profile three hole fixed bracket shroud
  • Flip mechanism allows NVG to be stowed while not in use
  • Several points of adjustment for proper eye relief
  • Compatible with three-hole drilled helmets
  • 5 Year Standard Limited Warranty

 

Dimensions 4.65” L x 2.58” W x 3.80” H
Weight 6.35 OZ
Fore/Aft Travel 1.10”
Height Adjustment .90”

 

The post G30 Mount appeared first on 1776 Sporting Goods.

]]> 7104 G29 Mount https://1776sportinggoods.com/product/g29-mount/ Thu, 07 Mar 2024 18:51:08 +0000 https://1776sportinggoods.com/?post_type=product&p=7097 BREAKAWAY NVG MOUNT

The G29 breakaway mount has become a night vision goggle industry standard. The Wilcox G29 breakaway mount is the
ultimate solution when your mission requires fast roping, maritime operations or quick entry or exit of mobility platforms. These
conditions often pose snag hazards for NVG users. Pioneering the “break away” feature, this mount has built safety into it’s
design by disconnecting from the base under stress which reduces the potential for neck injury

The post G29 Mount appeared first on 1776 Sporting Goods.

]]>
28300G29M-B Wilcox G29 Helmet Mount

FEATURES & BENEFITS

  • Designed specifically for the LUCIE NVG
  • Dovetail shoe interface securely locks NVG’s into place
  • Breakaway lever allows mount to break away under stress
  • Flip mechanism allows NVG to be stowed while not in use
  • Several points of adjustment for proper eye relief
  • Compatible with all Wilcox shrouds (except lo-pro)
  • 5 Year Standard Limited Warranty
Dimensions 3.95” L x 2.50” W x 3.10” H
Weight 6.72 oz
Internal Power Source N/A
Runtime N/A
Fore/Aft Travel .90”
Height Adjustment .90”

 

The post G29 Mount appeared first on 1776 Sporting Goods.

]]> 7097 G24 Mount https://1776sportinggoods.com/product/g24-mount/ Wed, 06 Mar 2024 20:22:47 +0000 https://1776sportinggoods.com/?post_type=product&p=7092 BREAKAWAY NV GOGGLE MOUNT

The Wilcox G24 low profile breakaway mount has become the industry standard for night vision goggle mounting solutions.
With a dovetail shoe interface, the G24 offers near universal mounting compatibility. During the G24’s initial development,
extensive operational input was considered and since it’s initial fielding, millions of operational hours have established operator
muscle memory. Pioneering the “break away” feature, safety is built into this mount’s design; Under stress, the mount will break
away from the base, reducing the potential for neck injury. This mount can be summarized in one word – quality. The superior
finish, attention to design and functionality, the G24 optimizes the use of your night vision google.

The post G24 Mount appeared first on 1776 Sporting Goods.

]]> 28300G24-B G24 Mount (Breakaway Base/Magnet), Black 28300G24-C G24 Mount (Breakaway Base/Magnet), Coyote 28300G24-T G24 Mount (Breakaway Base/Magnet), Tan

PRODUCT OVERVIEW

The G24 Mount has been field tested by operators and fine-tuned from their hands on experience with our product. Pioneering the “break away” feature, this mount disconnects from the base under stress if desired reducing the potential for neck injury of the operator. The G24 mount is your “go to” for night vision goggles. Mount/shroud kits available. Wilcox confidently stands by our 5 year warranty on every shroud and helmet mount when used together as a system.

 

  • Dovetail shoe interface securely locks NVG’s into place
  • Breakaway feature reduces the risk of neck injury
  • Ergonomical adjustments allow for one handed operation
  • Maintains a very low-profile on the helmet
  • Rail interface & extended models available
  • Developed & battle proven by U.S. & NATO SOF

 

Dimensions 3.98” L x 2.60” W x 2.40” H
Weight 5.86 OZ
Fore/Aft Travel >1.3”
Height Adjustment .90”

 

The post G24 Mount appeared first on 1776 Sporting Goods.

]]> 7092 G21 Mount https://1776sportinggoods.com/product/g21-mount/ Wed, 06 Mar 2024 18:29:05 +0000 https://1776sportinggoods.com/?post_type=product&p=7086 BREAKAWAY NVG MOUNT

The G21 breakaway mount has become a night vision goggle industry standard. The Wilcox G21 mount was designed
specifically for the AN/PVS-21 night vision goggle and offers the innovation of our patented breakaway feature. In addition, the
mount has two flip levers that allow the goggle to be uniquely stowed in a high or low stow position. Pioneering the “break away”
feature, this mount has built safety into it’s design by disconnecting from the base under stress which reduces the potential for
neck injury.

The post G21 Mount appeared first on 1776 Sporting Goods.

]]> 28300G21-B G21 Breakaway Base/Three Hole Shroud/Lanyard/Cup, Black 28300G21-T G21 Breakaway Base/Three Hole Shroud/Lanyard/Cup, Tan

FEATURES & BENEFITS

  • Designed specifically for the AN/PVS-21
  • Dovetail shoe interface securely locks NVG’s into place
  • Breakaway feature allows mount to break away under stress, or to securely lock in place by means of a break away lever
  • Two way flip mechanism provides a high and low stow
  • Maintains a very low profile stance on the helmet
  • Several points of adjustment for proper eye relief
  • Compatible with all Wilcox shrouds (except lo-pro)
  • 5 Year Standard Limited Warranty

 

Dimensions (Operational) 2.75” L x 2.30” W x 3.60” H
Weight (G21 Mount Only) 0.42 lb (6.72 oz)
Weight (Shroud Only) .10 lb (1.06 oz)
Material Construction Light Weight, Aerospace Grade Metal
Accommodates NVG AN/PVS-21
Vertical Height Adjustment .870” Total Travel
Fore/Aft Travel 1.44” Total Travel

 

The post G21 Mount appeared first on 1776 Sporting Goods.

]]> 7086 G11 Mount https://1776sportinggoods.com/product/g11-mount/ Wed, 06 Mar 2024 00:03:54 +0000 https://1776sportinggoods.com/?post_type=product&p=7076 NIGHT VISION GOGGLE MOUNT

The G11 non-breakaway mount with horn interface shoe, is the industry standard for night vision goggle mounting. The G11, when attached to a Wilcox One-Hole Shroud, Three-Hole Shroud, or the standard Army shroud, allows firm attachment of the bayonet/horn style interfaces like that of the AN/PVS 7B/D. The G11 maintains a very low-profile stance on the helmet with a non-breakaway design the reduces the risk of the loss of the NVG.

The post G11 Mount appeared first on 1776 Sporting Goods.

]]>
28300G11-B Wilcox G11 Helmet Mount (Army)

FEATURES & BENEFITS

  • A built-in auto-off feature allows the goggle to automatically turn off when stowed for NVG Devices
  • Horn interface securely locks NVG into place
  • Force to overcome flip mechanism
  • Maintains a very low profile on the helmet
  • Stow mechanism provides “force to overcome” locking in the operational and stowed positions
  • Each mechanical adjustment is durable and ergonomically positioned for easy one-handed operation while handling a weapon
  • Compatible with all Wilcox shrouds (except lo-pro)
  • Several adjustment points provide precise eye relief
  • Under Contract with U.S ARMY
  • 5 Year Standard Limited Warranty

 

Dimensions (Operational) 4.65” L x 2.58” W x 3.80” H
Weight 0.40 lb (6.35 oz)
Material Construction Lightweight, Aerospace Grade Metal
Accommodates NVG AN/PVS-7B/D
Vertical Height Adjustment <0.90” Total Travel
Fore/Aft Travel <1.6” Total Travel
Tilt to Horizon <12º Above, <5º Below
Flip 110º

 

The post G11 Mount appeared first on 1776 Sporting Goods.

]]> 7076 ELCAN Accessories https://1776sportinggoods.com/product/elcan-accessories/ Tue, 07 Dec 2021 01:07:41 +0000 https://1776sportinggoods.com/?post_type=product&p=2399 All Accessories for ELCAN including DFOV14, DFOV156 and TFOV139 Models.

The post ELCAN Accessories appeared first on 1776 Sporting Goods.

]]>   Tenebraex Flip Covers(For ELCAN) provide protection for your optic and can conveniently flip up and out of the way when it’s time to shoot. These Tenebraex Flip Covers for the ELCAN SpecterOS, SpecterDR (DFOV14 & DFOV156), and TFOV139 Sights are a great way to protect your expensive lenses from dirt, debris, and scratches.

The 2-Tab Ocular Flip Cover can be attached directly to the Eyepiece end of the DFOV14 & DFOV156 (This Flip Cover is interchangeable with either sight) without any additional parts, however in order to attach the 2-Tab Flip Cover to the Objective End, you will need either an Attachment Ring (PN: SDR-AR4-AR) or a Killflash (ARD) with a knurled (or profiled) edge (PN: ARD-SDR-B for Black or ARD-SDR-T for Tan).

The Anti-Reflection Device (ARD), also known as a Killflash can be purchased separately, however Weaponsights.com includes the ARD (except the TR139) and Flip Covers with every sight purchased. Please note, the TR139 does not have an available ARD (KillFlash) and the Flip Covers simply attach to this optic.

If your SpecterDR or SpecterOS has the older style Anti-Reflection Device (KillFlash) with a smooth edge; you’ll need to use an Adapter Ring to attach the Objective Flip Cover or upgrade to the newer ARD with a knurled edge. For those of you with the smooth edge ARD’s, because of a change in the Flip Cover design, you’ll also need to ensure that your Flip-Covers have 1 single Tab…not 2. The single Tab design will work with the Adapter Rings.

The new 2-Tab Flip-Cover design eliminates the Adapter Ring, which had a tendency to crack when over-tightened, which was very easy to do with a metal screw and plastic ring.

Again…

In order to attach the Objective Flip Cover, you have to have either

  1. The Old Style (Smooth) ARD + Adapter Ring + 1 Tab Flip Cover
  2. The New Style (Profiled Edge) ARD + 2 tab Flip Cover
  3. An Attachment Ring + 2 Tab Flip Cover

This Attachment Ring works in place of the ARD. If the ARD is installed, unthread & remove the ARD by turning it counter-clockwise, then install the Attachment Ring by threading it clockwise into the objective end. The Attachment Ring has a profiled edge, similar to the ARD and allows you to install a 2 Tab Flip Cover.

The Attachment Ring Part Number for the SFOV4 and DFOV14 sights is SDR-AR4-AR.

The Attachment Ring Part Number for the DFOV156 sight is SDR-AR6-AR

One more time…you must have the ARD or Attachment Ring installed in order to use the 2 Tab Objective Flip Cover.

New design (2 Tab) Ocular (Eyepiece) Flip Coves no longer require the Adapter Ring and the same Flip Cover will fit both the 1X-4X & 1.5X-6X Models.

If you have the older style single tab Flip Cover (PN: UAC013-FCR), you will need the Adapter Ring as well.

KillFlash ® ARDs use a high-tech honeycomb material to provide a low-cost, retro-fittable, field-practical way to hide reflections from optical surfaces.

 

Anti-Reflection Devices

Premium Optic Performance:
The 2″ honeycomb KillFLASH® ARD provides the same performance as a 6″ sunshade. Premium performance, reduced size.

XLUME® Coating:
Tenebraex’s® proprietary XLUME® coating absorbs light, further reducing the potential for glint or reflections.

Designed for Military:
Tenebraex® KillFLASH® ARD’s were designed for the USA military and millions are in use around the world.

Optic Lens Protection:
Protect your optic lens from damage and scratches.

OPTIC INSTALLATION:
Simply screw into front of scope. Do NOT use any thread lock compounds.Carefully thread into the objective (front) of the optic. There is a risk of cross threading on finer threads. The ARD should screw in without any resisitance. Once the ARD is fully threaded and finger tight, continue to hand tight. Do not use thread sealants or tape. To remove, turn counter clockwise.

OPTIC CLEANING
Treat the honeycomb grid with the same care you would any fine optical surface. If clogged with dirt or grit, remove ARD from optic and blow clean.
If necessary, run palin water through the honeycomb to clear it. Tap the killFLASH® housing lightly on a surface to clear excess water, then blow through it to remove the remainder and dry it. Reinstall ARD.

Lens Covers

  • These scope covers are designed to stay locked when closed and flip back out of your way when open.
  • Protect the lenses on your scope from dust, dirt, grime and grit.
  • Full range of options for both the objective and ocular end of your scope or optic.
  • A full 360° of rotation means you can locate your open covers exactly where you need them, expanding your sight.
  • Huge inventory to fit most major optic make and models of scopes. Don’t see what you’re looking for? Please feel free to contact us directly!
  • Designed for the US Military and used by millions, our MIL-SPEC covers represent years of proven performance in the toughest environments.

Adapter Rings

INSTALLATION of Adapter Frame Ring:
Slip adapter over ocular (eyepiece) or objective end of scope until it seats. Turn the T15 Torx bolt until it is finger tight. Once finger tight, tighten another 1/4 to 1/2 turn. To remove, loosen Torx bolt and pull straight backwards off of optic.

INSTALLATION of Adapter Ring:
Carefully thread the adapter ring into the objective (front) of the optic. There is a risk of cross threading on finer threads. The adapter ring should screw in without any resisitance. Once the adapter ring is fully threaded and finger tight, continue to hand tight. Do not use thread sealants or tape. To remove, turn counter clockwise.

BUIS (Back-Up Iron Sights or “Peep Sights”)

PLEASE NOTE: The information below applies to the 1X-4X ONLY (this does not apply to the 1.5X-6X).

There used to be 2 different hole/screw sizes for the BUIS, however around 2012 ELCAN starting using all the same size and we were unaware for quite some time. People were calling in and saying that the screws they got with the 4x kit were too small.

As a general rule, pretty much anything with the new CR2032 battery housing & a “new” serial # (ATI-31, ATI-32, ATI-55, ATI-56, ATI-45, ATI-46…etc) would all take PSK-SDR6-B for either the 4x or 6x. These are all post 2016 models.

Anything w/the old 1/3N Battery and ATI-10, ATI-12 serial #’s use Part Number PSK-SDR4-B for the 4x. (PSK-SDR6-B for everything else).

I only use the year 2012 as a guide line because the optics sold between 2012 & 2014 are a mix, so it’s a guessing game for those ones on which kit it takes. We know for sure models Pre 2012 still take the 2 different sizes.

PSK-SDR4-B    (Old) Back-Up Iron Sights w/Screws (OEM Replacements)

PSK-SDR6-B    (New) Back-Up Iron Sights w/Screws (OEM Replacements)

 

Bikini Covers

Product Description

Flexible rubber lens cover seals out unwanted moisture and debris. It comes equipped with a rubber pull tab for fast installation and removal. If you prefer to operate the SpecterDR’s without the ARD, yet still want lens protection, you can either use the Bikini-Style Cover (P/N: OSC-SDR-B (Black)/OSC-SDR-T(Tan) or an Attachment Ring P/N: SDR-AR4-AR)that threads into the objective end of the sight itself, where an ARD typically goes [No ARD Attached] and allows you to attach the Objective Flip-Cover without the ARD attached.

Manufacture: ELCAN

The post ELCAN Accessories appeared first on 1776 Sporting Goods.

]]> 2399 AERO Precision https://1776sportinggoods.com/product/aero-precision/ Tue, 21 Sep 2021 17:38:03 +0000 https://1776sportinggoods.com/?post_type=product&p=662 Ultralight 34mm Scope Mount, SPR – Anodized Black or FDE Cerakote   The Ultralight 34mm SPR Scope Mount features a rear ring that is pushed forward 2″, resulting in better eye relief. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers […]

The post AERO Precision appeared first on 1776 Sporting Goods.

]]> Ultralight 34mm Scope Mount, SPR – Anodized Black or FDE Cerakote

  The Ultralight 34mm SPR Scope Mount features a rear ring that is pushed forward 2″, resulting in better eye relief. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection.

The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.

Black ( SKU: APRA211311 )

FDE ( SKU: APRA211312 )

Made In America Yes
Select Your Finish Anodized Black or FDE Cerakote
Material 6061 T6 extruded aluminum construction
Scope Ring Size 34mm
Scope Mount Profile SPR
Weight(s) 4.1 oz
Other Features Designed for AR type upper receivers
Screw Torque – 15 in-lbs

 

Ultralight 34mm Scope Mount, Extended – Anodized Black or FDE Cerakote

Featuring a rigid, lightweight design, the Ultralight 34mm Extended Scope Mount features a rear ring that is pushed forward 1″, resulting in better eye relief. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection.

The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.

Black ( SKU: APRA211211 )

FDE ( SKU: APRA211212 )

Made In America Yes
Select Your Finish Anodized Black or FDE Cerakote
Material 6061 T6 extruded aluminum construction
Scope Ring Size 34mm
Scope Mount Profile Extended
Weight(s) 4 oz
Other Features Designed for AR type upper receivers
Screw Torque – 15 in-lbs

 

Ultralight 30mm Scope Mount, SPR – Anodized Black or FDE Cerakote

The Ultralight 30mm SPR Scope Mount features a rear ring that is pushed forward 2″, resulting in better eye relief. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection.

The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry

Black ( SKU: APRA210600 )

FDE ( SKU: APRA210610 )

Made In America Yes
Select Your Finish Anodized Black or FDE Cerakote
Material 6061 T6 extruded aluminum construction
Scope Ring Size 30mm
Scope Mount Profile SPR
Weight(s) 3.36oz
Other Features Designed for AR type upper receivers
Screw Torque – 15 in-lbs

 

Ultralight 30mm Scope Mount, Extended – Anodized Black or FDE Cerakote

The Ultralight 30mm Extended Scope Mount features a rear ring that is pushed forward 1″, resulting in better eye relief. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection.

The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.

Black ( SKU: APRA210500 )

FDE ( SKU: APRA210510 )

Made In America Yes
Select Your Finish Anodized Black or FDE Cerakote
Material 6061 T6 extruded aluminum construction
Scope Ring Size 30mm
Scope Mount Profile Extended
Weight(s) 3.27oz
Other Features Designed for AR type upper receivers
Screw Torque – 15 in-lbs

 

Ultralight 30mm Scope Mount – Anodized Black or FDE Cerakote

Featuring a rigid, lightweight design, the Ultralight 30mm Scope Mount complements many high-end optic platforms. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection.

The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.

Black ( SKU: APRA210200 )

FDE ( SKU: APRA210210 )

Made In America Yes
Select Your Finish Anodized Black or FDE Cerakote
Material 6061 T6 extruded aluminum construction
Scope Ring Size 30mm
Scope Mount Profile Standard
Weight(s) 3.27oz
Other Features Designed for AR type upper receivers
Screw Torque – 15 in-lbs

The post AERO Precision appeared first on 1776 Sporting Goods.

]]> 662