The TWS13C dedicated thermal weapon sight uses state of the art thermal imaging core and high-end Germanium objective lens to provide users with crisp imagery in total darkness and challenging visual conditions such as smoke, fog, and dust. Constructed with extremely durable composite molded plastic and designed to meet or exceed MIL-STD-810G, the TW13C can be used on a variety of medium range weapons systems up to 7.62 caliber including the M4, M4A1 and M16A2.

N-Vision Optics’ TWS13C weapon sight provides operators with a significant advantage in detecting, observing, and engaging targets. Combining a rugged and lightweight hi-tech composite material housing with advanced thermal imaging technology, the TWS13C generates superior IR images and ensures target acquisition at maximum possible ranges.

The TWS13C features a 640X512, 17 micron core with a 35mm objective lens optimal for scenarios where field of view is a significant factor. TW13C comes with four reticles selectable and adjustable to boresight (including M4, M4A1 and M16A2).

The post TWS13C Thermal Weapon Sight appeared first on 1776 Sporting Goods.

N-Vision Optics’ newly redesigned TWS13 dedicated thermal weapon sight line-up provides operators with a significant advantage in detecting, observing, and engaging targets in all conditions, day or night. Combining a rugged and lightweight hi-tech composite material housing with advanced thermal imaging technology, the TWS13 series of weapon sights generate superior IR images and ensures target acquisition at maximum possible ranges.

Ideal for medium to long range weapon systems, the TWS13B is equipped with a 336X256, 17 micron core with a 50mm objective lens allowing for greater detection, recognition, and identification ranges.

The TWS13 includes four reticle patterns custom-tailored for individual weapons with corresponding zero, color, brightness and contrast. Polarity is displayed in either white hot or black hot options to best suit the tactical scenario. Standard 2x and 4x digital zoom enables clear identification of targets before engaging them. The TWS13 allows the user to photograph targets, save images to internal storage and later download them to a computer via USB cable.

The post TWS13B Thermal Weapon Sight appeared first on 1776 Sporting Goods.

The post TWS13A Thermal Weapon Sight appeared first on 1776 Sporting Goods.

The post TC35A Thermal Clip-on Weapon Sight appeared first on 1776 Sporting Goods.

The UNS-A2 is a high-resolution Night Vision Clip-On device that mounts on any MIL-STD-1913 rail interface and in front of existing day optics. The UNS-A2 is installed, operated, and removed without tools and requires no adjustment to the zero of the day optics.

UNS-A2 is ideally suited for medium to long range weapon systems up to and including .50 caliber.

The post UNS-LR A2 Universal Night Sight appeared first on 1776 Sporting Goods.

Compatible: PVS-14, PVS-7, GT-14, G15, MUM14

N-Vision Optics 3X afocal lens can be attached in front of the existing objective lens of the thermal camera, giving the user instant 3X magnification with no electrical or mechanical modifications to the thermal core of the system. Hardcoat anodized to meet mil spec standard MIL-A-8625 Type 3, N-Vision Optics state of the art 3X germanium lens is amazingly light (weighing just below 200 grams) and fully submersible. The lens can be easily customized to match perfectly with almost any thermal imaging system.

• Magnification: 3x
• Spectal Range: 8.0-12 μm
• Front Lens Clear Aperture Diameter: 67.0 mm
• Rear Lens Clear Aperture Diameter: 27.0 mm
• Dimensions: 3 x 2 (inches)  /  7 x 5 (centimeters)
• Weight: 194 g/ 6.8 oz
• Submersibilty: 20 m/ 66 ft
• Compatibility: Universal

5x Magnifier Lens

NOX/HALO-X USB Cable

NOX DVR Cable

HALO DVR Cable

HALO/ATLAS USB Cable

Thermal J Arm Adapter for Nox

NOX Dual Mount

PVS-14 Dual Mount Adapter

Dual Mount for G14

Magnetic Compass

Purge Kit, Night Vision

18650 Battery Charger

18650 Battery

Eye Cup

Replacement Eyecup for Halo, Halo-X, Nox, PVS-14, GT-14

NOX35 Replacement Lens Cover

HALO-LR Replacement Lens Cover

NOX Picatinny Adapter

The post N-Vision Accessories appeared first on 1776 Sporting Goods.

Type 1
At 100 yards, 1x zoom

Type 2
At 100 yards, 1x zoom

Type 3
At 100 yards, 1x zoom

Type 4
At 100 yards, 1x zoom

Type 5
At 100 yards, 1x zoom

Type 6
At 100 yards, 1x zoom

Type 7
At 100 yards, 1x zoom

Type 8
At 100 yards, 1x zoom

NOX TIPS and POINTERS

IMAGE OPTIMIZATION

Based on differing environmental conditions and general user preference, certain measures can be taken to optimize the image seen through the NOX. All parameters related to image optimization are located in under Menu -> Video Settings.

BRIGHTNESS: Changes the brightness of the display. CE Increasing Contrast Enhancement (CE) helps to distinguish fine image details in low thermal contrast conditions, but setting the value too high will lead to a grainy image. Setting the CE Level between 0- 2 works best for average conditions.
SHARPNESS Increasing image sharpness makes details of the image more pronounced but setting it too high may lead to loss of finer details.
GAMMA Changing the Gamma curve for the display will make the image appear darker or brighter. Gamma does not have any effect on image details. Default value is 1.
ROI Selects the most appropriate Region of Interest (ROI). For scanning, recommended setting ROI to Full. ROI ½ and ROI ¼ leads to the optimization of the image based, correspondingly, on the ½ or ¼ central part of the image. This will make the part of the image that is closer to the center look better but the peripheral parts of the image may become washed out.
CALIBRATION NOX only supports manual calibration. Calibration is performed b completely covering the objective lens and holding down the CAL button until the image appears to reset itself. The unit has to be calibrated when it is first turned on and later when the image quality degrades during use.

MISCELLANEOUS

FOCUS NOX scopes have be carefully focused for the best performance. Focus the NOX by rotating the Objective Lens Focusing Ring.
DIOPTER ADJUSTMENT Adjust the focusing ring to achieve the best possible focus on the display screen. Make sure that the reticle is as sharp as possible.
MULTIPLE ZEROES Users can save up to four reticle positions by selecting one of the Reticle Numbers in the Reticle Menu. Each Reticle Number is saved with its Reticle Type and zeroing information. Performing a manual reset of the NOX will
not affect saved zeroes.
MENU ITEMS VISIBILITY Note that at high values of Contrast Enhancements (CE) and Sharpness settings, menu font may appear dim or blurred. It is recommended to decrease CE and Sharpness settings if this causes issues with clarity. We recommend setting CE and Sharpness values to 0-2 and only change them if it is necessary.
Menu fonts may be hard to read in Edge Detect mode (polarity). It is recommended to enter menu mode while in Black Hot or White Hot.
BATTERIES NOX takes one regular CR123 battery or 18650 battery (with battery extender). Select proper battery type under System Settings menu for accurate power level indication. Use reputable battery sources. Remove batteries after use.
EXTERNAL POWER NOX will work from any external USB power source (power banks/bricks, USB chargers, computer ports, as long as USB output is rated at least 1A).
VERTICAL LINES ON THE SCREEN AFTER THE STARTUP In some very rare cases, the user may observe vertical lines on the screen after the startup. This is related to the inner workings of the thermal imaging core. This is not considered a defect or failure of the system. To clean up the screen, simply cycle through the zoom.
RESTORE TO FACTORY SETTINGS Occasionally, the user may want to restore the NOX to original factory settings. In some cases this may help to improve the image quality. To restore the unit, while it is On, press and hold the -/Reset Switch for approximately 15 seconds until the unit turns off (image disappears). NOX will return to original factory settings upon powering back up.
MOUNTS NOX is shipped from the factory with both dovetail mount and weapon mount installed. The user may remove or replace one or both mounts if they are not needed or the dovetail mount has to be moved to the other side. Use 20 in- lb torque and we recommend using Vibra-Tite VC-3 Threadmate or similar thread locker. WARNING: DO NOT EVER use the dovetail mount or mounting hole for weapon mounting the NOX.
ROTATION It is necessary to move the dovetail mount to the weapon mount side for use on the left eye while the NOX is head mounted. Icon orientation is configured under the Systems Settings menu. Note: the NOX cannot be used as a weapon sight while icons are flipped. In this orientation the reticle is off and Reticle menu and Zero are disabled.

The post NOX35 Thermal Scope appeared first on 1776 Sporting Goods.

The post NOX18 Thermal Monocular appeared first on 1776 Sporting Goods.

Type 1
At 100 yards, 1x zoom

Type 2
At 100 yards, 1x zoom

Type 3
At 100 yards, 1x zoom

Type 4
At 100 yards, 1x zoom

Type 5
At 100 yards, 1x zoom

Type 6
At 100 yards, 1x zoom

Type 7
At 100 yards, 1x zoom

Type 8
At 100 yards, 1x zoom

The post HALO35 Thermal Scope appeared first on 1776 Sporting Goods.

Features

Type 1
At 100 yards, 1x zoom

Type 2
At 100 yards, 1x zoom

Type 3
At 100 yards, 1x zoom

Type 4
At 100 yards, 1x zoom

Type 5
At 100 yards, 1x zoom

Type 6
At 100 yards, 1x zoom

Type 7
At 100 yards, 1x zoom

Type 8
At 100 yards, 1x zoom

HALO/HALO-X TIPS and POINTERS

IMAGE OPTIMIZATION

Based on differing environmental conditions and general user preference, certain measures can be taken to optimize the image seen through the HALO-X. Parameters related to image optimization are located under Main Menu -> Display and Main
Menu -> System:

BRIGHTNESS: Changes the brightness of the display. CE Increasing Contrast Enhancement (CE) helps to distinguish fine image details in low thermal contrast conditions, but setting the value too high will lead to a grainy image. Setting the CE Level between 1 and 3 works best for normal conditions.
SHARPNESS Increasing image sharpness makes details of the image more pronounced but setting it too high may lead to loss of finer details.
GAMMA Changing the Gamma curve for the display will make the image appear darker or brighter. Gamma does not have any effect on image details. The default value is 1.
ROI Selects the most appropriate Region of Interest (ROI). For scanning, the recommended ROI setting is Full. ROI ½ and ROI ¼ leads to the optimization of the image based, correspondingly, on the ½ or ¼ central part of the image. This will make the part of the image that is closer to the center look better, but the peripheral parts of the image may become washed out.
CALIBRATION HALO-X only supports manual calibration. Calibration is performed by completely covering the objective lens and holding down the CAL button until the image appears to reset itself. The unit has to be calibrated when it is first turned on and later when the image quality degrades during use.

MISCELLANEOUS

FOCUS HALO-X scopes do not need to be focused. HALO-X’s fixed focus provides high-quality imaging in most real-life scenarios without requiring the user’s attention.
DIOPTER ADJUSTMENT Adjust the focusing ring to achieve the best possible focus on the display screen. Make sure that the reticle is as sharp as possible.
MULTIPLE ZEROES Users can save up to four reticle positions by selecting one of the Profiles in the Reticle Menu. Each Profile is saved with its Reticle Type and zeroing information. Performing a reset of the HALO-X will not affect saved zeroes.
MENU ITEMS VISIBILITY Note that at high values of Contrast Enhancements (CE) and Sharpness settings, the menu font may appear dim or blurred. It is recommended to decrease CE and Sharpness settings if this causes issues with clarity. We recommend setting CE and Sharpness values from 0 to 2 and only change them if necessary. Menu fonts may be hard to read in Edge Detect mode (polarity). It is recommended to enter menu mode while in Black Hot or White Hot.
BATTERIES HALO-X takes two 18650 rechargeable batteries. Use only the recommended KeepPower batteries. Remove batteries after use.
EXTERNAL POWER HALO-X will work with any external USB power source (power banks/bricks, USB chargers, computer ports) as long as USB output is rated at least 2A.
RESTORATION TO FACTORY SETTINGS In some cases, this may improve the image quality. To restore the unit while it is On, press and hold the (-) Button for approximately 15 seconds until the unit turns off. HALO-X will return to original factory settings upon powering back up.
DOWNLOADING PHOTOS AND VIDEOS TO PC Power up the HALO-X with batteries. Select Connect to PC in the Main Menu. Connect the HALO-X to a PC with a USB cable. It will appear as an external hard drive. Move pictures/videos to a PC, delete them if necessary. Press the PWR button to disconnect.
INTERNAL STORAGE HALO-X has a generous amount of storage space dedicated to photos and videos, but video files are quite large. You may store up to 45 minutes of videos (close to 3.5 GB!) before you’ll run out of space. Delete unnecessary files to free up the storage space.
FREEING STORAGE SPACE There are three ways to free up internal storage. Delete All Files under Main Menu -> Camera, delete all or some files using the USB connection to a PC, or delete some or all files using the WiFi connection.

The post HALO-XRF Thermal Scope appeared first on 1776 Sporting Goods.